 The Elecro Pond Smart Digital Control is the intelligent pond or pool control system that allows you to control and maintain your pond to the perfect temperature as economically as possible.
The Elecro Pond Smart gives you a complete control solution for:
- Electric Heaters
- Heat Exchangers
- Heat Pumps
- Circulation Pumps
Elecro Pond Smart Digital Control Features:
- Priority Heating
- Accurate Temperature Control to 0.5ºC
- Diagnostic Display
- Fully Programmable With Timed Control
- 2 User Defined Temperature Set Points - to utilise off-peak electricity rates
The Elecro Pond Smart Digital Control is supplied fully equipped with flow switch, temperature sensor probe fitted in custom pipe work T-Piece, for simple integration into any pool technical facility.
Priority heating is when the Pond Smart digital controller can determine that the ponds temperature has dropped below the minimum required temperature and then switches the ponds heating product (via the control cable) so that the heating product can heat the pond back to the minimum temperature. Once the minimum temperature has been reached the heater will also switch off.
The Elecro Pond Smart Digital Control has been designed to be the most economical heating controller available, by allowing the use of 2 set points you are able to select a higher set point for when fuel is cheaper (i.e. off peak) and then a lower set point for when fuel is more expensive (i.e. peak rate). It is recommended that the lower set point is programmed to be your absolute minimum temperature, if the pond then drops below this temperature during the day the heater can top up the heat to keep the pond at the minimum temperature. |
