These Reducing Sleeves, or inserts as many people call them, are to reduce the internal sizes of a particular pipe to enable a slightly smaller pipe to fit the connection, whether that connection is to a socket, bend or some other fitting - they should, of course, be solvent welded into place prior to the actual pipe connection being made.
Reducing sleeves enable the use of ball valves, slide valves and other fittings with solvent weld waste piping as well as PVC pressure pipe. Simply glue over the end of the solvent weld pipe before fitting to the appropriate valve or fitting. One required for each side of the valve.
1 1/2-inch Reducer /Imperial Pressure To 40 mm Solvent
2-inch Reducer /Imperial Pressure To 50 mm Solvent
3-inch Reducer /Imperial Pressure To 82 mm Solvent
4-inch Reducer /Imperial Pressure To 110 mm Solvent
These Heavy-duty Pvc Grey Pressure tank connectors are suitable for use with quarantine Tanks, these tank connectors can also be used as side outlets in the construction of pond filters to connect up to slide valves or ball valves.
Waste drain off connectors, we have even had customers use...
These Threaded tank Connectors are very useful for that awkward job. These have a 40 mm, 50 mm and 110 mm threaded male with a plain solvent weld socket on the other end, they can be used putting drain off valves in filters or return's in to Quarantine tanks. The 110 mm Threaded Tank connectors...
All our tank connectors are supplied with self tapping stainless steel screws and are therefore ideally suited for total immersion under water.
Many inferior products use zinc plated screws and can have adverse effect under water, especially when salt or chemicals such as formalin and...
We are now able to supply the new flanged tank connectors in Grey PVC pressure pipe. As with the black waste tank connectors these new PVC ones are also complete with self tapping stainless steel screws and are therefore ideally suited for total immersion under water.
These Heavy duty Pvc Grey...